• View Cart
    Details Quick View

    Air Permeability Tester ToniPERM II – Model 6575

    The air permeability tester ToniPERM II is designed for the determination of the specific surface of powders, especially suitable for the permanent control of manufacturing characteristics in the daily laboratory work. This measuring procedure serves as practice oriented alternative for the standard procedures according to EN 196 as well as ASTM C 204.

    Key benefits for the user:

    • Simple operation with reproducible results
      • Intuitive operation with touchscreen
      • Automatic volume correction
    • Automatic quadruple test of a double sample with a single operating effort
    • Robust, low-maintenance design*
    • Easy data export via LAN interface ** or USB stick

    * Ask about our extended warranty terms

    ** ToniLINK software required

  • Vicat Apparatus is used for determining the setting time and consistency of cement by the Vicat Method.
    View Cart
    Details Quick View

    Automatic Vicat Needle ToniSET Compact

    Automatic, computer-controlled Vicat needle instrument providing six measuring stations for the determination of the setting characteristics of binding materials, preferably of:
    • Cement according to EN 196, ASTM C 191 and AS/NZS 2350
    • Gypsum according to EN 13279 and ASTM C 472
      Key benefits for the user:
    • Increased efficiency through parallel automatic determination of the setting behavior in conformity with standards
    • Robust low-maintenance execution with automatic cleaning of the penetrating needle
    • Fast tesing mode for rapid setting building materials
    • Easy data export via USB stick
    • Simple conversion to other product standards e.g. cement, mortar in less than one minute
  • Vicat Apparatus is used for determining the setting time and consistency of cement by the Vicat Method.
    View Cart
    Details Quick View

    Automatic Vicat Needle ToniSET Expert – Model 7312

    The ToniSET Expert is a PC-controlled needle instrument according to Vicat and is designed for the standard-compliant determination of the setting characteristics of cement, gypsum and mortar according to: EN 196-3, EN 13279-2, EN 480-2, ASTM C191, ASTM C472 and ASTM C807   Key benefits for the user:
    • User-friendly, self-explaining testing software
    • Precise, standard-compliant positioning of the needle on the specimen surface
    • High-precision, electronic measurement of the penetration depth due to incremental measuring system (resolution 0.05 mm)
    • Low maintenance expenditure and high durability due to solid and high-quality design
    • Quick measurement mode with deactivatable cleaning function
  • inlet apparatus type “Böhme” designed determination bulk density building lime according EN 459-2
    View Cart
    Details Quick View

    Böhme Inlet Apparatus – Model 4702

    The inlet apparatus type "Böhme" is designed for the determination of the bulk density of building lime according to EN 459-2.

    The inlet instrument consists of a cylindrical container made of brass with a volume of exactly one liter, an adaptor flange with shutter and a top mounted filling device with release lever. After pouring the bulk goods into the top mounted filling device the shutter is opened and the goods drop into the container. Then the surplus goods are skimmed and the weight is measured.

     

    Design

    The inlet apparatus consists of a cylindrical container made of brass with a volume of one liter, an adaptor flange with shutter, and a top mounted filling device with shutter activating lever.
  • Performance unit for the generation of a defined ambient temperature for the cement calorimeters of the ToniCAL series
    View Cart
    Details Quick View

    Cement Calorimeter ToniCAL – Model 7338

    Computer controlled isothermal heat flow calorimeter for the continuous determination of the total evolved heat of hydration of binding materials, preferably of cement according to ASTM C1702. With online computer operation the instrument allows to directly determine the heat development rate (J/g) in dependence of the elapsed time. Object is the use for rational Quality Control as alternative methods for ASTM C186 and DIN EN 196-8.   Key benefits for the user: ✓ Rigid, durable measuring instrument for industrial and laboratory tasks ✓ Self-calibration function by operator ✓ Very high detection sensitivity by three switchable measuring ranges for different types of binding materials ✓ Test method with great informational value and with very good reproducibility ✓ Detection of the initial peak ✓ Difference in temperature between measuring cell and ambience ✓ Extension for testing additives by adapting an after-injection module with homogenization function ✓ Evaluation of the results via computer with numerical and/or graphical output
  • View Cart
    Details Quick View

    Cement Calorimeter ToniCAL Hexa – Model 7334

    Computer controlled isothermal heat flow calorimeter with six measuring cells for the continuous determination of the total evolved heat of hydration of binding materials, preferably of cement according to ASTM C1702.   Key benefits for the user:
    • parallel, independent, time-shifted operation of the six measuring cells in all operating states such as: self-calibration, zero effect determination and measuring
    • high measuring sensitivity due to three switchable measuring ranges for different binders
    • possibility of re-injection of additives including homogenization
    • evaluation of results by means of a PC with numerical and/or graphic output
  • Performance unit for the generation of a defined ambient temperature for the cement calorimeters of the ToniCAL series
    View Cart
    Details Quick View

    Cement Calorimeter ToniCAL Trio – Model 7339

    Computer controlled isothermal heat flow calorimeter with three measuring cells for the continuous determination of the total evolved heat of hydration of binding materials, preferably cement according to ASTM C1702.   Key benefits for the user: ✓ Detection of the initial peak ✓ Self-calibration function by operator ✓ Three thermally insulated measuring cells in one calorimeter vessel, offset by 120° ✓ Rigid, durable measuring instrument for industrial and laboratory tasks ✓ Difference in temperature between measuring cell and ambience ✓ Extension for testing additives by adapting an after-injection module with homogenization function ✓ Test method with great informational value and with very good reproducibility ✓ Independent, timely varying parallel use of the three measuring cells in all operation modes ✓ Very high detection sensitivity by three switchable measuring ranges for different types of binding materials ✓ Evaluation of the results via computer with numerical and/or graphical output
  • Performance unit for the generation of a defined ambient temperature for the cement calorimeters of the ToniCAL series
    View Cart
    Details Quick View

    Concrete Calorimeter ToniCAL – Model 7336

    Computer controlled isothermal heat flow calorimeter for the continuous determination of the total evolved heat of hydration of concrete. With online computer operation the instrument allows to directly determine the heat development rate (J/g) in dependence of the elapsed time.   Key benefits for the user:
    • easy manipulation
    • meaningful test procedure with high repeatability
    • evaluation of the results via computer with numerical and/or graphical display and documentation
    • auto-calibration via electrical power measurement
  • Expansion Tester ToniCHAT
    View Cart
    Details Quick View

    Expansion Tester for Le Chatelier Moulds

    Device for the standard-compliant testing of the expansion of Le Chatelier moulds without permanent deformation (resilience) according to EN 196-3. The device consists of a solid base plate onto that a stand is mounted. The stand has a clamping device to clamp the Le Chatelier moulds and has an adjustable scale to measure the expansion of the mould. A weight and a key ring chain with a total mass of 300 g are part of the delivery.   Key benefits for the user: ✓ Adjustable scale for the adaption to the indicator needles ✓ Easy, user-friendly handling ✓ Solid design made of aluminum
  • The analyzer TonLIME is designed to determine the content of free, uncombined lime in cement and cement clinker
    View Cart
    Details Quick View

    Free Lime Analyzer ToniLIME

    The analyzer TonLIME is designed to determine the content of free, uncombined lime in cement and cement clinker. The operating principle is based on the measurement of the electric conductivity in a solution consisting of cement and hot glycol in comparison with a stored calibration curve. Key factors for the user:
    • Measurement result in less than 10 minutes, very short preparation time for the user
    • no operator intervention required during the test procedure
    • Connection to a PC for parameterization and evaluation of the results via the RS 232 and RS 485 interfaces is also possible
    • integrated database with all necessary test parameters and intelligent menu navigation
  • View Cart
    Details Quick View

    Fully Automatic Penetrometer – ToniFORCE 6420

      The ToniFORCE is a fully automatic penetrometer for recording the setting behaviour of building materials like 3D printing concrete, cement, gypsum or mortar. The recorded data allow the determination of both the setting behaviour and the penetration resistance.   A great milestone for Toni Technik: ToniFORCE   Key benefits for the user:
    • Accurate electronic measurement of the penetration depth
    • Measurement of the penetration force (by precision force transducer based on strain gauges)
    • Fully automatic test execution
    • Stand-alone operation (no PC needed)
    • Ambient temperature recording
    • Test protocol in PDF format
    • Connectivity to "Laboratory Information Management System" (LIMS) via integrated LAN interface
  • Cement, Mortar, Specimen Preparation, Testing Instruments
    View Cart
    Details Quick View

    Jolting Apparatus – Model 6135

    The jolting apparatus is designed for the standard-compliant compaction of cement mortar and other binding material in moulds and meets the entire requirements of the standards EN 196 part 1 and ISO 679.   Key benefits for the user: ✓ Extremely sturdy, durable construction ✓ Solid, deformation-resistant table ✓ Clamping of the mold by quick clamping elements ✓ Comfortable one-button operation ✓ On demand delivery with foundation set or pre-casted concrete foundation ✓ Modification of the clamping device for moulds of other manufacturers is possible ✓ Sound protection hood for the reduction of the acoustic emission and for the protection of the user available

Title

Where to find us…

Toni Technik Baustoffprüfsysteme GmbH
Alexander-Meißner-Straße 12
12526 Berlin
Germany

Tel: +49(0)30-464036-0
Fax: +49(0)30-464036-22
E-Mail: [email protected]

For privacy reasons Google Maps needs your permission to be loaded. For more details, please see our Privacy Policy.
I Accept

Get in touch with us…

Do you have questions, service inquiries or a request for quotation?
Fill in the form and send us a message…

 

Please enable JavaScript in your browser to complete this form.
HINT: required for service and for spare part requests
Drag and drop files here or
Upload upto 5 Files. Max File Size: 3 MB
Newsletter Registration
We would like to keep you updated with our newsletter. Latest trends and advances in the industry as well as developments made by Toni Technik are some of our topics.

Go to Top