-
Application Performance unit for storage of freshly made specimens at 90% relative humidity, particularly for the storage of triple-moulds with freshly made 40 x 40 x 160 mm prisms or cubes 2“. Advantages ✓ Convenient storage of moulds next to the working area eliminates long transports ✓ Sliding drawers for easy insertion and removal of the moulds ✓ Undisturbed curing due to shock protected installation of the storage container
-
The performance unit consists of a rigid steel frame construction and is equipped with three stainless steel containers for the storage of specimens in water in accordance with standards.
The specimens can optionally be stored in a vertical or horizontal position.
Each container is equipped with an immersion thermostat that allows precise control of the water temperature.
The containers can be used individually, as each of them is equipped with an independent inlet valve and an independent drainage system.
The unit provides a storage capacity for 240 prisms (40 × 40 × 160 mm) in a horizontal position or for 630 prisms in a vertical position. Alternatively, up to 540 cubes with an edge length of 50 mm (2 inches) can be stored.
Advantages ✓ Compatible with the ToniSYSTEMLABORATORY ✓ Easy operation and handling ✓ High storage capacity at small footprint ✓ Integrated thermostat with digital display for the actual value and the set value ✓ Open and clear arrangement of the specimens -
The plasticity tester is designed for the determination of the workability of ceramic materials. The plasticity value according to Pfefferkorn is determined by measuring the plasticity of a specimen between a fixed lower bearing plate and a free falling upper brass plate. Advantages ✓ Reliable evaluation of characteristic values ✓ Simple operation
-
Automatic test plant for the standard-compliant testing of the splitting tensile strength of concrete paving stones in accordance with EN 1338.
- Accuracy: Quality Class 1 / DIN 51220 / BS 1610
- Sizes: 300 kN
-
In addition to the testing machines Toni Technik offers a wide range of testing devices. This range includes among others various compression-, bending- and splitting tensile devices that will save the time-consuming retrofitting of your machine and make your machine more universally applicable. The compression device model 4030 is designed for specimens which testing surfaces are too small to adjust the pressure plates of the testing machine in parallel to the specimen surface.
-
The testing software for all occasions, from production to research testXpert® III represents the new generation of materials testing software, developed on the latest Microsoft Windows platform and using state of the art software technology. TestXpert III is simple and flexible, user-friendly and powerful, accurate and cost-effective, intelligent and reliable. testXpert® III provides you with a standard testing platform for all applications and equipment. This uniform, integrated operating concept for testing machines and instruments reduces the training required for different testing machines to a minimum and gives you access to the entire unique testXpert® III product range for all your testing machines. Advantages of testXpert® III ✓ Informative icons ✓ Over 20.000 installations worldwide ✓ The same interface for every application ✓ Intuitive operation with clear structuring ✓ Clear, simple setup, with many optional features ✓ More than 30 software developers working full-time on new functions ✓ Service partners catering for your on-the-spot needs in over 50 countries ✓ Rest assured: you are in expert hands!
-
Automatic Vicat needle instrument providing one measuring station for the determination of the setting characteristics of binding materials, preferably of:
- Cement according to EN 196 and ASTM C 191
- Gypsum according to EN 13279 and ASTM C 472
- Mortar according to EN 480 and ASTM C 807
Key benefits for the user:
- The compact stand-alone solution for the automatic determination of the setting behaviour in conformity with standards. No external temperature control necessary
- Robust low-maintenance execution with automatic cleaning of the penetrating needle
- Fast tesing mode for rapid setting building materials
- Easy data export via USB stick
- Simple conversion to other product standards e.g. cement, mortar in less than a minute
-
Automatic Vicat needle instrument providing two or one measuring stations for the determination of the setting characteristics of binding materials, preferably of:
- Cement according to EN 196 and ASTM C 191
- Gypsum according to EN 13279 and ASTM C 472
- Mortar according to EN 480 and ASTM C 807
- The compact stand-alone solution for the automatic determination of the setting behaviour in conformity with standards. No external temperature control necessary.
- Robust low-maintenance precipitation with automatic cleaning of the penetrating needle.
- Turbo mode for fast setting building materials.
- Easy data export via USB stick.
- Simple conversion to other product standards e.g. cement, mortar in less than a minute.
-
Performance unit for the generation of a defined ambient temperature for the cement calorimeters of the ToniCAL series. Key benefits for the user: ✓ Storage space for consumables ✓ Integrable into ToniSYSTEMLABORATORY ✓ Precise temperature control, unaffected by the room temperature ✓ Subsequent integration of the available cement calorimeters of the series ToniCAL ✓ Installation space for monitor, mouse and keyboard ✓ Difference in temperature between measuring cell and ambience ✓ Storage space for the integration of a PC inside the unit ✓ Guarantee of an ambient temperature for the realization of the isotherm heat flow calorimetry at a temperature of 20°C respectively a preselected temperature ✓ Functional and user-friendly assembly of the control devices
-
ToniDCA is the control and evaluation software for the heat flow calorimeters of the series ToniCAL. Key benefits for the user: ✓ Integrated specimen data base ✓ Extrapolation of the curve of measured values ✓ Statistic evaluation ✓ Export function for data base files ✓ Printing function for result tables and diagrams ✓ Numerical and graphical display of the measured values ✓ Simultaneous indication of the actual test progress for up to 6 measuring cells
-
The universal interface software ToniLINK enables the bi- or unidirectional data transmission between a PC and the ToniTROL respectively the ToniPERM.
Key benefits for the user:
✓ Installation and setup by the user possible ✓ Testing orders can be sent to the ToniTROL ✓ Linkage with laboratory information systems (LIMS) ✓ Easy operation by onetime definition of the results to be stored and their order ✓ Calculation of the average value and the standard deviation ✓ Storage in ASCII-format with selectable separator -
ToniNORM is an expandable modular system for the automatic, computer-controlled testing from 10 kN to 10.000 kN that can be individually put together according to the customer requirements. Up to four load frames of the machine series ToniNORM can be individually combined and can be operated with only one Powerbox (hydraulic power unit) and a single ToniTROL (controller). Thereby each load frame can be optimally adapted to the respective test requirements. To determine the requested strength Toni Technik provides intelligent test solutions:
- Determination of compressive strength in accordance with DIN EN 993-5 and DIN EN ISO 8895
- Determination of flexural strength according to DIN EN 993-6, DIN EN 843-1, ASTM C1161, DIN EN 658-3 and DIN EN 843-2
- Determination of modulus of elasticity according to EN 843-2
-
The air permeability tester ToniPERM is designed for the determination of the specific surface of powders, especially suitable for the permanent control of manufacturing characteristics in the daily laboratory work according to EN 196 and ASTM C 204. Key benefits for the user:
- Our standard device (EN 196-6; ASTM C 204) for laboratory use in conformity with the standards
- Simple operation with reproducible results
- Intuitive operation with touch screen
- Automatic volume correction
- Robust, low-maintenance design*
- Easy data export via LAN interface** or USB stick
-
Application
Automatic, computer-controlled Vicat needle instrument providing eight measuring stations for the determination of the setting characteristics of binding materials, preferably of:
Key benefits for the user:
- Cost-effective solution for the automatic determination of the setting behaviour of cement in air-conditioned laboratories in conformity with standards by omission of the internal temperature control unit
- Robust low-maintenance execution with automatic cleaning of the penetrating needle
- Fast tesing mode for rapid setting building materials
- Easy data export via USB stick
-
Load frame for standard-compliant tensile strength tests on metallic specimens, like e.g. construction steel resp. reinforcing steel.
- Accuracy: Quality Class 1 / EN ISO 7500-1 / DIN EN 10 002
- Sizes: 100 kN / 200 kN / 400 kN / 600 kN / 1000 kN
-
Performance unit for the standard-compliant compaction of cement mortar and other binding materials according to EN 196, DIN 1164, ASTM C109 and other standards.
Key benefits for the user:
- Vibration in closed loop to ensure the selected amplitude
- Standardized 50 Hz vibration frequency, independent of the power input frequency
- Integrated calibration via software in the protected area
- Comfortable single button operation START/STOP
-
VicatDB is the control and evaluation software for the computer-controlled Vicat instruments of the series ToniSET. By the software tests can be prepared, parameterized, controlled, evaluated and recorded. Key benefits for the user: ✓ For every measuring station tests can be started in random order and at desired time ✓ For every measuring station of the Vicat instrument different parameters can be defined ✓ Simultaneous indication of the actual test conditions for up to 12 measuring stations ✓ Preinstalled standard penetration grids, e.g. EN 196-3 or ASTM C191 ✓ Integrated operator- and material data base ✓ Customized penetration grids can be compiled by Toni Technik ✓ Result evaluation by diagram and in single values ✓ Various evaluation- and anlaysis functions including subsequent parameter change ✓ Possibility to link with laboratory information systems (LIMS) with highly variable setting options ✓ Allows the definition of customized parameters by the user ✓ Enables the calibration of the instrument by the user ✓ Different user levels with password protection to protect sensitive settings
-
Operating Principle
The viscosity tester type Lehmann is designed to determine the viscosity of glazing and clay slips. The time is measured that a defined amount of test material needs to run through a nozzle with a specific cross section into a volumetric flask. Subsequently the viscosity value can be determined comparing the time with such a slip of known consistency needs.
Advantages
✓ High repeatability ✓ High accuracy ✓ Simple technique and handling ✓ Simple and quick measuring procedure (advantageous for test series and quality control)
