(function(w,d,s,l,i){w[l]=w[l]||[];w[l].push({'gtm.start': new Date().getTime(),event:'gtm.js'});var f=d.getElementsByTagName(s)[0], j=d.createElement(s),dl=l!='dataLayer'?'&l='+l:'';j.async=true;j.data-privacy-src= 'https://www.googletagmanager.com/gtm.js?id='+i+dl;f.parentNode.insertBefore(j,f); })(window,document,'script','dataLayer','GTM-5N8L3VKW');

The strength of cement is normally between 20 N/mm² and 50 N/mm² but the strength of high-performance concrete and reinforced concrete can amount 200N/mm² and more. The modulus of elasticity (Young´s modulus) of concrete is between 15,000 N/mm² and 45,000 N/mm² (depending on the hardened cement paste, the volume of the hardened cement paste, the used aggregates and the reinforcement).

Based on the brittleness of concrete the fracture strain is in a tenth percent range. These are – in relation to the specimen dimensions – deformations in a range of only a few hundredth of a millimeter; little more than a hairsbreadth. According to this Toni Technik testing systems are designed for deformation resistance and are equipped with high-sensitive and reproducible fracture detection.

For the standard quality control Toni Technik supplies single-purpose testing systems as well as customized solutions by the ToniNORM series, that is individually planned as per customer requirements.

Additionally we offer all-in-one solutions for the standard-compliant specimen preparation by the ToniSYSTEMLABORATORY, that are planned and realized according to the customer needs, also for already existing test laboratories.

You will profit from our experience of decades with highly diverse test requirements.

  • inlet apparatus type “Böhme” designed determination bulk density building lime according EN 459-2
    View Cart
    Details

    Böhme Inlet Apparatus – Model 4702

    The inlet apparatus type "Böhme" is designed for the determination of the bulk density of building lime according to EN 459-2.

    The inlet instrument consists of a cylindrical container made of brass with a volume of exactly one liter, an adaptor flange with shutter and a top mounted filling device with release lever. After pouring the bulk goods into the top mounted filling device the shutter is opened and the goods drop into the container. Then the surplus goods are skimmed and the weight is measured.

     

    Design

    The inlet apparatus consists of a cylindrical container made of brass with a volume of one liter, an adaptor flange with shutter, and a top mounted filling device with shutter activating lever.
  • Fully automatic test plant compact design standard-compliant compressive strength tests building materials, preferably efficient routine tests quality control
    View Cart
    Details

    Compression Test Plant ToniCON

    Fully automatic test plant in compact design for standard-compliant compressive strength tests on building materials, preferably for efficient routine tests and quality control on:
    • Concrete cylinders 4 inch / 6 inch according to ASTM C 39
    • Concrete cubes 100 mm / 150 mm edge length according to EN 12390-3
      Key benefits for the user:
    • Delivery as a ready-to-use, space-saving compact unit: "Set up, connect, test".
    • The high-precision manufactured spherical calotte is form-fit and backlash-free, finely tuned to the spherical shell and enables very precise force transmission
    • Connection possibility for scales, caliper, barcode reader and printer for automatic printout of raw data
    • Servo-hydraulic control in a closed control loop
    • Operation and evaluation via PC using testXpert III testing software
    • US-units selectable (lbs, psi, inch,…)
  • Fully automatic test plant compact design standard-compliant compressive strength tests building materials, efficient routine tests quality control
    View Cart
    Details

    Compression Test Plant ToniPACT II

    Fully automatic test plant in compact design for standard-compliant compressive strength tests on building materials, preferably for efficient routine tests and quality control on:
    • Cylinders 150 x 300 mm or 160 x 320 mm according to EN 12390-3
    • Cylinders 150 x 300 mm or 160 x 320 mm according to EN 12390-4 (strain cylinder test)
    • Cubes with 100 mm, 150 mm or 200 mm edge length according to EN 12390-3
    • Cubes with 100 mm, 150 mm or 200 mm edge length according to EN 12390-4 (strain cylinder test)
     
    • Accuracy: Quality Class 1 / DIN 51220 / EN ISO 7500-1
    • Sizes:           2000 kN / 3000 kN / 4000 kN
  • Performance unit for the generation of a defined ambient temperature for the cement calorimeters of the ToniCAL series
    View Cart
    Details

    Concrete Calorimeter ToniCAL – Model 7336

    Computer controlled isothermal heat flow calorimeter for the continuous determination of the total evolved heat of hydration of concrete. With online computer operation the instrument allows to directly determine the heat development rate (J/g) in dependence of the elapsed time.   Key benefits for the user:
    • easy manipulation
    • meaningful test procedure with high repeatability
    • evaluation of the results via computer with numerical and/or graphical display and documentation
    • auto-calibration via electrical power measurement
  • Deflection measurement device deformation controlled determination flexural tensile strength fiber reinforced concrete beam specimens ndustrial floors tunneling accordance
    View Cart
    Details

    Deflection Measurement Device, Model 0728-0729-0730

    Deflection measurement device for the deformation controlled determination of the flexural tensile strength of fiber reinforced concrete beam specimens used for industrial floors and for tunneling in accordance with:

    • ASTM C 1609 / ASTM C 1018
    • EN 14651 / EN14488
    • AFNOR P18-409
    • DBV-Merkblatt "steel fiber concrete"
     

    The device is made for testing beam specimens in the following sizes:

      ✓ 4 x 4 x 14 inch ✓ 100 x 100 x 350-500 mm ✓ 120 x 74 x 500 mm ✓ 150 x 150 x 500-700 mm ✓ 200 x 200 x 800 mm  

  • Verformungsaufnehmer
    View Cart
    Details

    Deformation Measurement Device – E-Module Model 0712/0704

    Application For determining the Young's modulus on concrete cylinders, drill cores and prisms. For recording the mean change in length at two lateral lines of the specimen.  
  • View Cart
    Details

    Fully Automatic Penetrometer – ToniFORCE 6420

     

    The ToniFORCE is a fully automatic penetrometer for recording the setting behaviour of building materials like 3D printing concrete, cement, gypsum or mortar. The recorded data allow the determination of both the setting behaviour and the penetration resistance.

     

    Key benefits for the user:

    • Accurate electronic measurement of the penetration depth
    • Measurement of the penetration force (by precision force transducer based on strain gauges)
    • Fully automatic test execution
    • Stand-alone operation (no PC needed)
    • Ambient temperature recording
    • Test protocol in PDF format
    • Connectivity to "Laboratory Information Management System" (LIMS) via integrated LAN interface
  • Load frame in compact design for the standard-compliant compressive strength tests on building materials, preferably for efficient routine tests and quality control
    View Cart
    Details

    Load Frame for Compressive Strength Tests – Model 2031

    Load frame in compact design for the standard-compliant compressive strength tests on building materials, preferably for efficient routine tests and quality control on:
    • Concrete cylinders 150 x 300 mm or 160 x 320 mm according to EN 12390-3
    • Concrete cubes with 100 mm, 150 mm or 200 mm edge length according to EN 12390-3
     
    • Accuracy: Quality Class 1 / DIN 51220 / EN ISO 7500-1 / EN 12390-4
    • Sizes: 2000 kN / 3000 kN / 4000 kN
       
  • Load frame large testing area dimensions standard-compliant compressive strength tests building material specimens kind, concrete brick natural stone specimens
    View Cart
    Details

    Load Frame For Compressive Strength Tests Model 2041

    Load frame with large testing area dimensions for standard-compliant compressive strength tests on building material specimens of all kind, e.g. concrete-, brick- and natural stone specimens. This load frame is made for extremely challenging test requirements in the quality control, the development and the research.
    • Accuracy:   Quality Class 1 / DIN 51220 / EN ISO 7500-1
    • Sizes:          5000 kN / 6000 kN / 8000 kN / 10000 kN
       
  • Load frame for standard-compliant testing flexural strength railway sleepers, in accordance EN 13230
    View Cart
    Details

    Load Frame for Flexural Strength Tests – Model 2073

    Load frame for the standard-compliant testing of the flexural strength of railway sleepers, e.g. in accordance with EN 13230.
    • Accuracy:    Quality Class 1 / EN ISO 7500-1 / DIN 51220
    • Sizes:          300 kN / 400 kN / 500 kN / 600 kN / 1000 kN
  • Multi-purpose load frame standard-compliant testing compressive flexural strength slabs, bars, standard stones, concrete bars, concrete stone products curb stones, paving stones further building materials
    View Cart
    Details

    Multi-purpose Load Frame – Model 2075

    Multi-purpose load frame for the standard-compliant testing of the compressive and flexural strength of slabs, bars, standard stones, concrete bars, concrete stone products (curb stones, paving stones, etc.) and further building materials.
    • Accuracy:    Quality Class 1 / EN ISO 7500-1 / DIN 51220
    • Sizes:           200 kN / 300 kN
       
  • Automatic test plant for the standard-compliant testing of the splitting tensile strength of concrete paving stones in accordance with EN 1338
    View Cart
    Details

    Splitting Tensile Test Plant ToniSPLIT

    Automatic test plant for the standard-compliant testing of the splitting tensile strength of concrete paving stones in accordance with EN 1338.
    • Accuracy:   Quality Class 1 / DIN 51220 / BS 1610
    • Sizes:           300 kN
       
  • ToniNORM is an expandable modular system for the automatic, computer-controlled testing from 10 kN to 10.000 kN
    View Cart
    Details

    ToniNORM – Modular, customized and expandable 2011, 2010

    ToniNORM is an expandable modular system for the automatic, computer-controlled testing from 10 kN to 10.000 kN that can be individually put together according to the customer requirements. Up to four load frames of the machine series ToniNORM can be individually combined and can be operated with only one Powerbox (hydraulic power unit) and a single ToniTROL (controller). Thereby each load frame can be optimally adapted to the respective test requirements. To determine the requested strength Toni Technik provides intelligent test solutions:
    • Determination of compressive strength in accordance with DIN EN 993-5 and DIN EN ISO 8895
    • Determination of flexural strength according to DIN EN 993-6, DIN EN 843-1, ASTM C1161, DIN EN 658-3 and DIN EN 843-2
    • Determination of modulus of elasticity according to EN 843-2
       

Where to find us…

Toni Technik Baustoffprüfsysteme GmbH
Alexander-Meißner-Straße 12
12526 Berlin
Germany

Tel: +49(0)30-464036-0
Fax: +49(0)30-464036-22
E-Mail: [email protected]

For privacy reasons Google Maps needs your permission to be loaded. For more details, please see our Terms & Conditions.

Get in touch with us…

Do you have questions, service inquiries or a request for quotation?
Fill in the form and send us a message…

 

HINT: required for service and for spare part requests
Drag and drop files here or
Upload upto 5 Files. Max File Size: 3 MB
Newsletter Registration
We would like to keep you updated with our newsletter. Latest trends and advances in the industry as well as developments made by Toni Technik are some of our topics.

Go to Top