- Increased efficiency through parallel automatic determination of the setting behavior in conformity with standards
- Robust low-maintenance execution with automatic cleaning of the penetrating needle
- Fast tesing mode for rapid setting building materials
- Easy data export via USB stick
- Simple conversion to other product standards e.g. cement, mortar in less than one minute
The main interest of the building chemistry is to influence the characteristics of building materials by chemical processes of this materials with corresponding composites, depending on the desired application.
Further on the target is to optimize production processes and to reduce costs as a consequence.
The building chemistry includes a wide research area, like e.g.:
- The reaction of building materials with several substances
- The use of different chemicals, like glue, sealing materials and color coatings
- The chemical reactions during the setting process of cement respectively concrete
You will profit from our experience of decades with highly diverse test requirements.
-
Automatic, computer-controlled Vicat needle instrument providing six measuring stations for the determination of the setting characteristics of binding materials, preferably of: Key benefits for the user:
-
Combined test plant for the standard-compliant testing of the compressive and flexural strength of cement and other binding materials, preferably for efficient routine tests of:
- Prisms 40 x 40 x 160 mm accord. to EN 196 / ISO 679
- Cubes 50 mm (2 inch) according to ASTM C109
- Cubes 70.7 mm according to BS 1881
Key benefits for the user:
- connection possibility for a third load frame, e.g. 3000 kN compression test frame for concrete testing
- possibility of machine control and test evaluation via a PC using testXpert software
- future-proof through retrofittable software modules
- possibility to connect to Laboratory Information and Management Systems (LIMS)
-
Test plant in compact design for efficient, standard-compliant compressive strength tests on cement and other binding materials, preferably on:
- delivery as a ready-to-use, space-saving compact unit: "Set up, connect, test".
- very easy programming and operation
- possibility to connect to Laboratory Information and Management Systems (LIMS)
- future-proof through retrofittable software options
- US-units selectable (lbs, psi, inch,…)
-
Application For determining the Young's modulus on concrete cylinders, drill cores and prisms. For recording the mean change in length at two lateral lines of the specimen.
-
Compact, fully automatic test plant for standard-compliant flexural strength tests on cement and other binding materials, preferably on prisms 40 x 40 x 160 mm in accordance with EN 196 and ISO 679.
- Accuracy: Quality Class 1 / EN ISO 7500-1 / DIN 51220
- Sizes: 10 kN / 20 kN / 50 kN
-
The ToniFORCE is a fully automatic penetrometer for recording the setting behaviour of building materials like 3D printing concrete, cement, gypsum or mortar. The recorded data allow the determination of both the setting behaviour and the penetration resistance.
Key benefits for the user:
- Accurate electronic measurement of the penetration depth
- Measurement of the penetration force (by precision force transducer based on strain gauges)
- Fully automatic test execution
- Stand-alone operation (no PC needed)
- Ambient temperature recording
- Test protocol in PDF format
- Connectivity to "Laboratory Information Management System" (LIMS) via integrated LAN interface
-
Load frame for efficient, standard-compliant flexural strength tests on mortar prisms, preferably on prisms 40x40x160 mm in accordance with EN 196 and ISO 679.
- Accuracy: Quality Class 1 / EN ISO 7500-1 / DIN 51220
- Sizes: 10 kN / 20 kN / 50 kN
-
Application Mortar mixer for the standard-compliant preparation of cement mortar and cement paste according to EN 196, ISO 679, DIN 1164, ASTM C 305, Ö-Norm B 3310 and further standards. Key benefits for the user:
- robust, durable housing
- wear-resistant, precise stirring tool
- possibility of adding granular and liquid aggregates during the mixing procedure
- integrated connection for dust exhaust
-
Standard-compliant operation according to EN 196-1, EN 196-3, EN 480-1, ASTM C 305, ASTM C 359, ASTM C 451, ISO 679 and according to own specifications.
Automatic mixing of cement, mortar, gypsum and other materials including automated feed of sand and water
Key benefits for the user:
- High standard of work safety, user-friendliness and conformity to norms as with ToniMIX Standard.
- Convenient programming of own customer-specific mixing processes, also according to local standards
- Infinite adjustable of stirring rate and water dosing for individual standards and building materials, e.g. lightweight construction materials
- Equipped with an automatic sand feeding system
- LED illuminated, visible mixing chamber
- Connection for a dust extraction device included as standard
-
Standard-compliant operation according to EN 196-1, EN 196-3, EN 480-1, ASTM C 305, ASTM C 359, ASTM C 451, ISO 679 and according to own specifications. Automatic mixing of cement, mortar, gypsum and other materials including automated feed of sand and water, as well as torque measurement for the production of a defined viscosity.
Advantages
- Our best Mixer with all features of ToniMIX Standard and ToniMIX Expert
- Determination and recording of viscosity behaviour of the mixture by means of torque measurement
- Equipped with an automatic sand feeding system
- Simply optimization of the mortar rheology by automatic water dosing to achieve a target viscosity value
- LED illuminated, visible mixing chamber
- Connection for a dust extraction device integrated
-
Application Manual Vicat needle device with a measuring point for determining the solidification behavior of binders, in particular:
- Cement according to EN 196, ASTM C 187 and ASTM C 191
- Mortar according to EN 480 and ASTM C 807
-
Application For the storage of specimens in tempered water. Advantages ✓ Compatible with the ToniSYSTEMLABORATORY ✓ Easy operation and handling ✓ High storage capacity by storage in six respectively seven levels ✓ Integrated thermostat with digital display for the actual value and the set value
-
Application Performance unit for storage of freshly made specimens at 90% relative humidity, particularly for the storage of triple-moulds with freshly made 40 x 40 x 160 mm prisms or cubes 2“. Advantages ✓ Convenient storage of moulds next to the working area eliminates long transports ✓ Sliding drawers for easy insertion and removal of the moulds ✓ Undisturbed curing due to shock protected installation of the storage container
-
The performance unit consists of a rigid steel frame construction and is equipped with three stainless steel containers for the storage of specimens in water in accordance with standards.
The specimens can optionally be stored in a vertical or horizontal position.
Each container is equipped with an immersion thermostat that allows precise control of the water temperature.
The containers can be used individually, as each of them is equipped with an independent inlet valve and an independent drainage system.
The unit provides a storage capacity for 240 prisms (40 × 40 × 160 mm) in a horizontal position or for 630 prisms in a vertical position. Alternatively, up to 540 cubes with an edge length of 50 mm (2 inches) can be stored.
Advantages ✓ Compatible with the ToniSYSTEMLABORATORY ✓ Easy operation and handling ✓ High storage capacity at small footprint ✓ Integrated thermostat with digital display for the actual value and the set value ✓ Open and clear arrangement of the specimens -
In addition to the testing machines Toni Technik offers a wide range of testing devices. This range includes among others various compression-, bending- and splitting tensile devices that will save the time-consuming retrofitting of your machine and make your machine more universally applicable. The compression device model 4030 is designed for specimens which testing surfaces are too small to adjust the pressure plates of the testing machine in parallel to the specimen surface.
-
Automatic Vicat needle instrument providing one measuring station for the determination of the setting characteristics of binding materials, preferably of:
- Cement according to EN 196 and ASTM C 191
- Gypsum according to EN 13279 and ASTM C 472
- Mortar according to EN 480 and ASTM C 807
Key benefits for the user:
- The compact stand-alone solution for the automatic determination of the setting behaviour in conformity with standards. No external temperature control necessary
- Robust low-maintenance execution with automatic cleaning of the penetrating needle
- Fast tesing mode for rapid setting building materials
- Easy data export via USB stick
- Simple conversion to other product standards e.g. cement, mortar in less than a minute
-
Automatic Vicat needle instrument providing two or one measuring stations for the determination of the setting characteristics of binding materials, preferably of:
- Cement according to EN 196 and ASTM C 191
- Gypsum according to EN 13279 and ASTM C 472
- Mortar according to EN 480 and ASTM C 807
- The compact stand-alone solution for the automatic determination of the setting behaviour in conformity with standards. No external temperature control necessary.
- Robust low-maintenance precipitation with automatic cleaning of the penetrating needle.
- Turbo mode for fast setting building materials.
- Easy data export via USB stick.
- Simple conversion to other product standards e.g. cement, mortar in less than a minute.
-
Performance unit for the generation of a defined ambient temperature for the cement calorimeters of the ToniCAL series. Key benefits for the user: ✓ Storage space for consumables ✓ Integrable into ToniSYSTEMLABORATORY ✓ Precise temperature control, unaffected by the room temperature ✓ Subsequent integration of the available cement calorimeters of the series ToniCAL ✓ Installation space for monitor, mouse and keyboard ✓ Difference in temperature between measuring cell and ambience ✓ Storage space for the integration of a PC inside the unit ✓ Guarantee of an ambient temperature for the realization of the isotherm heat flow calorimetry at a temperature of 20°C respectively a preselected temperature ✓ Functional and user-friendly assembly of the control devices
-
ToniNORM is an expandable modular system for the automatic, computer-controlled testing from 10 kN to 10.000 kN that can be individually put together according to the customer requirements. Up to four load frames of the machine series ToniNORM can be individually combined and can be operated with only one Powerbox (hydraulic power unit) and a single ToniTROL (controller). Thereby each load frame can be optimally adapted to the respective test requirements. To determine the requested strength Toni Technik provides intelligent test solutions:
- Determination of compressive strength in accordance with DIN EN 993-5 and DIN EN ISO 8895
- Determination of flexural strength according to DIN EN 993-6, DIN EN 843-1, ASTM C1161, DIN EN 658-3 and DIN EN 843-2
- Determination of modulus of elasticity according to EN 843-2
-
Application
Automatic, computer-controlled Vicat needle instrument providing eight measuring stations for the determination of the setting characteristics of binding materials, preferably of:
Key benefits for the user:
- Cost-effective solution for the automatic determination of the setting behaviour of cement in air-conditioned laboratories in conformity with standards by omission of the internal temperature control unit
- Robust low-maintenance execution with automatic cleaning of the penetrating needle
- Fast tesing mode for rapid setting building materials
- Easy data export via USB stick
