-
The Water Bath ToniCHAT allows the standard-compliant, controlled boiling of binding agent samples (i.e. Le Chatelier moulds) for the determination of the volume stability or rate of risk regarding a subsequent extension of the binding agent (cement) caused by hydration. The ToniCHAT corresponds exactly to the requirements of the standard EN 196-3 and performs an autonomous and controlled test cycle. Key benefits for the user: ✓ Permanent indication of target / actual temperature ✓ Temperature control with an exactitude of 0.1°C ✓ Capacity for up to 16 Le Chatelier Rings ✓ Test execution optionally under water or steam ✓ Fully automatic test cycles according to defined parameters ✓ Controlled test procedure for accurate reproducible test results ✓ Integrated drain hose for an easy and fast water change ✓ Heating up from 20°C to 100°C within 30±5 minutes ✓ Stabilization of boiling temperature for three hours
-
Load frame in compact design for the standard-compliant compressive strength tests on building materials, preferably for efficient routine tests and quality control on:
- Concrete cylinders 150 x 300 mm or 160 x 320 mm according to EN 12390-3
- Concrete cubes with 100 mm, 150 mm or 200 mm edge length according to EN 12390-3
- Accuracy: Quality Class 1 / DIN 51220 / EN ISO 7500-1 / EN 12390-4
- Sizes: 2000 kN / 3000 kN / 4000 kN
-
Load frame in table-design for compressive strength tests on building materials of all kind, preferably for the quality control and efficient routine tests. Accuracy: Quality Class 1 / DIN 51220 / EN ISO 7500-1 Sizes: 200 kN / 300 kN / 400 kN / 600 kN / 1000 kN
-
Load frame with large testing area dimensions for standard-compliant compressive strength tests on building material specimens of all kind, e.g. concrete-, brick- and natural stone specimens. This load frame is made for extremely challenging test requirements in the quality control, the development and the research.
- Accuracy: Quality Class 1 / DIN 51220 / EN ISO 7500-1
- Sizes: 5000 kN / 6000 kN / 8000 kN / 10000 kN
-
Load frame for efficient, standard-compliant flexural strength tests on mortar prisms, preferably on prisms 40x40x160 mm in accordance with EN 196 and ISO 679.
- Accuracy: Quality Class 1 / EN ISO 7500-1 / DIN 51220
- Sizes: 10 kN / 20 kN / 50 kN
-
Multi-purpose load frame for standard-compliant flexural strength tests on plates, bars, standard stones, roofing tiles and further building materials and components. Accuracy: Quality Class 1 / EN ISO 7500-1 / DIN 51220 Sizes: 10 kN / 20 kN / 50 kN
-
Load frame for standard-compliant testing of the flexural strength of gypsum plates, plates made of fiber materials, concrete bars, concrete stone products (curb stones, paving stones), building material specimens and whole components, e.g. according to EN 12390-5. Accuracy: Quality Class 1 / EN ISO 7500-1 / DIN 51220 Sizes: 10 kN / 20 kN / 100 kN / 200 kN / 300 kN
-
Load frame for the standard-compliant testing of the flexural strength of railway sleepers, e.g. in accordance with EN 13230.
- Accuracy: Quality Class 1 / EN ISO 7500-1 / DIN 51220
- Sizes: 300 kN / 400 kN / 500 kN / 600 kN / 1000 kN
-
Load frame for standard-compliant flexural strength tests on concrete bars, concrete stone products, building material specimens and components. Accuracy: Quality Class 1 / EN ISO 7500-1 / DIN 51220 Sizes: 200 kN / 300 kN
-
Manual air permeability tester according to Blaine for the determination of the specific surface (grinding fineness / Blaine value) of cement and other powdered materials in accordance with EN 196 and ASTM C 204. Design Lacquered steel sheet stand with mounted U-tube manometer. The manometer is equipped with a conical seat for the measuring cell and level marks for the manometer fluid. The measuring cell is made of stainless steel and fits exactly to the conical seat of the U-tube manometer. Behind the manometer a mirror is mounted to avoid reading errors. To record the ambient temperature a thermometer is installed on the instrument.
-
Automatic mixing of cement, mortar, gypsum and other materials including automated sand and water addition. Standard-compliant operation according to EN 196-1, EN 196-3, EN 480-1, ASTM C305, ASTM C359, ASTM C451, ISO 679 and other standards.
Key benefits for the user:
- High standard of work safety due to access protection, splash guard and interlocks*
- Simple operation
- Intuitive operation
- Plug & Play: immediately ready for use
- Downward compatible tools: continue to use your existing stirrers and keys of the ToniMIX type
- Standard-compliant mixing processes according to EN, ISO, ASTM** including water dosing
* Start of the mixer only possible with inserted key
** DIN EN 196 Teil 1, ISO 679, DIN 1164, ASTM C
-
Application Mortar mixer for the standard-compliant preparation of cement mortar and cement paste according to EN 196, ISO 679, DIN 1164, ASTM C 305, Ö-Norm B 3310 and further standards. Key benefits for the user:
- robust, durable housing
- wear-resistant, precise stirring tool
- possibility of adding granular and liquid aggregates during the mixing procedure
- integrated connection for dust exhaust
-
Standard-compliant operation according to EN 196-1, EN 196-3, EN 480-1, ASTM C 305, ASTM C 359, ASTM C 451, ISO 679 and according to own specifications.
Automatic mixing of cement, mortar, gypsum and other materials including automated feed of sand and water
Key benefits for the user:
- High standard of work safety, user-friendliness and conformity to norms as with ToniMIX Standard.
- Convenient programming of own customer-specific mixing processes, also according to local standards
- Infinite adjustable of stirring rate and water dosing for individual standards and building materials, e.g. lightweight construction materials
- Equipped with an automatic sand feeding system
- LED illuminated, visible mixing chamber
- Connection for a dust extraction device included as standard
-
Standard-compliant operation according to EN 196-1, EN 196-3, EN 480-1, ASTM C 305, ASTM C 359, ASTM C 451, ISO 679 and according to own specifications. Automatic mixing of cement, mortar, gypsum and other materials including automated feed of sand and water, as well as torque measurement for the production of a defined viscosity.
Advantages
- Our best Mixer with all features of ToniMIX Standard and ToniMIX Expert
- Determination and recording of viscosity behaviour of the mixture by means of torque measurement
- Equipped with an automatic sand feeding system
- Simply optimization of the mortar rheology by automatic water dosing to achieve a target viscosity value
- LED illuminated, visible mixing chamber
- Connection for a dust extraction device integrated
-
Application Preparation of prism shaped samples, 40x40x160 mm made of mortar, especially cement mortar in accordance with the standards EN 196 1, ISO 679, DIN EN 12808 4, EN 1015 11 and ASTM C 348. Advantages
- The bars and end pieces are individually marked to ensure a perfect fit
- The design of the base plate and surface grinding avoids deformation of the mould in the long term
- The special steel used ensures the prescribed dimensional stability in the long term when using brass rulers
- The mould can be supplied with or without bores for the shrinkage test
-
Multi-purpose load frame for the standard-compliant testing of the compressive and flexural strength of slabs, bars, standard stones, concrete bars, concrete stone products (curb stones, paving stones, etc.) and further building materials.
- Accuracy: Quality Class 1 / EN ISO 7500-1 / DIN 51220
- Sizes: 200 kN / 300 kN
-
Application Manual Vicat needle device with a measuring point for determining the solidification behavior of binders, in particular:
- Cement according to EN 196, ASTM C 187 and ASTM C 191
- Mortar according to EN 480 and ASTM C 807
-
Application Determination of the initiation of stiffening of gypsum in accordance with DIN EN 13279 Part 2 and ASTM C191. Analysis of the setting behavior of dental gypsum in accordance with DIN EN 26873.
- Gips nach EN 13279 und ASTM C 472
- Dentalgips nach EN 26873
-
Application For the storage of specimens in tempered water. Advantages ✓ Compatible with the ToniSYSTEMLABORATORY ✓ Easy operation and handling ✓ High storage capacity by storage in six respectively seven levels ✓ Integrated thermostat with digital display for the actual value and the set value
-
Performance unit for the standard-compliant compaction of unshaped refractory products like dense, thermal insulating refractory concrete and other building materials in accordance with EN ISO 1927-5. The ToniVIB magnetic features a magnetic clamping plate for clamping of the moulds. Key benefits for the user:
- Closed-loop operation in accordance with the standards, for automatic adjustment of the selected amplitude, independent of the weight of the mould and the mass to be compacted
- Comfortable magnetic clamping of mould and mould attachment
- Parameterization via touch screen, last selected settings are saved
- Comfortable single button operation START / STOP
